OBDSTAR X300 DP Plus Correct Odometer for VW Sagitar

This test case from OBDSTAR tech support team,it show how to use OBDSTAR X300 DP Plus Programmer to adjust mileage for VW Sagitar.

Procedures:

Enter the OBDSTAR X300 DP Plus menu to select “Diag Program”è”Cluster Calibrate”è”VW”

Select “Select from vehicle”

Select “Sagitar”

Then select “NEC+24C64”

Read EEPROM

It will show the massage “Please turn the ignition first.If it is a smart key ,please turn off ignition,and then turn it on,press “ENT” key continue.”

Then enter the file name to save the EEPROM file.(Backup EEPROM)

After saving the EEPROM,back menu to select “Mileage Adjust”

Warning massage:

Note:Adjustment mileage may caused the EEPROM data to be damaged,please backup the EEPROM data file.

The current mileage is 22223,you need to enter the value you want.

Here input “50,000” as a example

Please turn the ignition first.If it is a smart key ,please turn off ignition,and then turn it on,press “ENT” key continue.

Ensure the instrument in the black screen state.

Finish

For more about OBDSTAR X300 DP PAD2,please check here:

http://www.uobdii.com/wholesale/obdstar-x300-dp-pad2-key-master-plus-full-configuration.html